The interior joiner frame slitwithout a protruding of the frameas an interior sign
■ It is neat in space appearance.
■ The design with a floating frame having the dent on around the frame.
■ The sign frame that able to associate with the color of a slit for the living room impression.
■ The product having uniqueness for the frame and slit color with playfulness.
A common specification
| Fitting joiner | Olefin sheet, Flush structure |
| Frame design | 3 design (Lighting / Flat / Horizontal joint) |
| Frame | Olefin sheet |
| Correspondence to a thickness of baseboard | 7mm |
| Correspondence to a thickness of wall | Finished board with 130 |
| Opening height | 2,400 |
| Vertical frame | Vertical overlay frame (only white color) Vertical lower frame (select slit color) |
| Vertical lower frame | (select slit color) |
| Upper frame | integrated type (only white single color) |
Functions created by slit design with a different viewpoint than ever before.
Realizing by frame slit that divided by fitting joinery design sketch. Because of a slit has a smaller area than fitting joiner, it can be divided simply fitting with surrounding design.
The new finishing has created by design of bottom joint in the area in the thin area of the frame.
It not only “lighting = Fitting joiner “, but it also has a design with the leak of light from both slit.
※ It does not have a lighting emitting function; it is a mechanism that allows light transparent.
Example
Line up
Hinged door
(Passage Latch・Indicator lock)
- Lever handle set (Passage Latch・Indicator lock)
- 3D adjustment pivot hinge
- Φ12 acrylic bar scope
Sliding door
(Passage Latch・Indicator lock)
- Passage Latch door pull
- Hook rock with indicator
- Φ12 acrylic bar scope
- Soft closing door hangar (door end・door tail)
- Guide line with floor
Out-set sliding door
(Passage Latch)
- Aluminum door pull (one side)
- Celling direct-attached white rail
- Soft closing door hangar (door end・door tail)
- Guide line with floor
Note: There is no door pull on the above surface. There is a door pull on the back. （On the surface, the small fitting joiner will be a door pull)
Door design & Color
Slit design (lighting)
Acrylic mist tone width: 7mm
Correspondence/Fitting body: 4 patterns available
Slit: Depends on fitting pattern
Side joint design
The input of two horizontal joints (resin silver color)
Color/fitting body: 3 patterns available
Slit: according to fitting pattern
※The outset sliding door cannot be used
Flat design
Correspondence/Fitting body: 4 patterns available
Slit: Depends on fitting pattern
Slit design
Flat design
Slit design
Flat design
Side joint design
Slit design
Flat design
Side joint design
Slit design
Flat design
Side joint design
＜MWH＞white
＜BLA＞Blue Ash
＜MTG＞Matte Gray
＜MRG＞Marron Gray
Slit design
Flat design
Slit design
Flat design
Side joint design
Slit design
Flat design
Side joint design
Slit design
Flat design
Side joint design
The accent color set up the general color for the fitting joiner, it is a softly colored and blend into the spaces.
※Please crick the each color samples below to refer the specific information.
［ Color of slit frame ］
There is a sawtooth part and not transparent because of the plastic board is separated. Also, the screw will be seen through the lighting.
“The better slit design “, it gives accent on the opening parts as using the natural color. Bringing this feature, we set the general color including the red, blue, gentle grayish colors.
Other
Metal fitting
Lever handle
Indicator lock
Pivot hinge
Door catcher
Door stopper
Digging handle (sliding handle)
Indicator lock (sickle lock)
Long sliding handle
Skylight
Swinging door rail
Door hanger rail
